Now welcoming new UK and international clients in person (London and Ringwood) and online

Strength and performance optimisation for cycling

Strength and performance optimisation for cycling

On assessment of cyclists that visit us due to injury or pain, typically, multiple imbalances are present. Imbalances stop muscles from working in their optimum recruitment sequence, create faulty motor patterns and often only lead to one result, and that is a long lay off due to injury. Not only can imbalances and poor structural balance lead to injury, but also reduce potential, as the working muscles will not be working the way that they are supposed to. Inefficient muscle activation slows us down. Imbalances may not be detected for months, resulting to inefficient cycling for a long period of time. 

Imbalances and inefficient muscle activation may be slowing you down

The aim of supplementary training for cyclists

We provide cyclists with supplementary training for their sport. The aim of supplementary training for cyclists is to improve efficiency and reduce energy leakage and excessive wear on the body’s structures. This is accomplished by achieving structural balance, optimal muscle synergy and the desired strength qualities for cycling. 

In addition, supplementary training for cyclists has aim to improve how each individual moves and feels once off the saddle. Due to the nature of cycling and more specifically the posture adopted and the way in which the muscles are utilised when cycling, what happens to the neuromuscular system when cycling has to be offset in order for your body to function efficiently and pain free once you are off the saddle. We achieve this by elongating and “switching off” short, tight muscles and in turn “switching on” weak, deactivated muscles. Thereafter, we integrate the action of the now activated muscles in to your movement patterns with sling system training. When this is successfully achieved you will move better and feel better.

What to expect during your initial appointments

We start with assessment in order to gain insight. We assess :

  • Posture
  • Movement patterns
  • Structural balance and strength

We discuss and record the clients training history and medical history. We then conduct an in depth analysis of the sport or activity and position requirements if it is a team sport or activity in order to comprehend the exact strength qualities required in order to safely and efficiently participate in the certain sport or activity.

We then take all the information gathered of both the sport requirements and the participants individuality and current level of performance and conduct a needs analysis which is followed by a detailed initial exercise prescription. 



The peak force or torque the neuromuscular system is capable of producing in a single maximal voluntary contraction, irrespective of the time element. Maximal strength plays a major role in sports where great external resistance must be overcome, such as hammer throwing, shot-putting and weightlifting. Its importance as a determinant of athletic performance diminishes as the duration of the event increases. For example a 60m indoor sprinter requires more maximal strength than a 1500m runner. Sports of an intermittent nature such as squash and tennis, which require intense burst of power interspaced with recovery periods, are also dependant on high levels of maximal strength. 


The ability of the neuromuscular system to produce the greatest possible force in the shortest possible time frame. It is the capacity of the neuromuscular system to overcome resistance with the greatest contraction speed possible. Speed-strength is a high priority in the field events, in the sprinting, kicking, jumping and throwing activities of team sports, and in the starts and acceleration phases of sprinting, cycling, rowing, ice skating and kayaking. 

Speed-strength encompasses three other strength qualities: starting strength, explosive strength and reactive strength.


The capacity to generate maximal force at the beginning of a muscular contraction; the capacity to overcome resistance and initiate movement. Starting strength is of importance in movements that require great initial speed, such as boxing blows and squash thrusts. Starting strength is a key determinant of performance in sports where the resistance to overcome is relatively light. It is dependant on the number of motor units accessed at the beginning of the contraction. 


The capacity to develop a vertical rise in force once movement has been initiated, measured in terms of the increase in force per unit of time; the ability of the neuromuscular system to continue developing the already initiated force as quickly as possible; the rate at which one can develop maximal or peak force. 

Explosive strength is a key determinant of performance in sports where the resistance to overcome is relatively great, such as judo, hammer throwing and shot putting. 


The ability to quickly switch from an eccentric contraction to a concentric contraction. This is also known as the stretch-shortening cycle. Reactive strength regulates performance in sports where stretch-shortening activity of the musculature is great. For example, in volleyball, in basketball and in weightlifting. In addition, the ability to quickly switch from an eccentric contraction to a concentric contraction is an important contributor to performance in jumping, throwing and sprinting. It is also an important factor for improving the efficiency of endurance runners, as it can assist in reducing ground contact times. 


it is the capacity of muscles to resist fatigue while generating force over a period of time. Strength Endurance is characterised by high strength levels coupled with high levels of endurance. It is of particular importance in cyclical endurance events, such as rowing, swimming, canoeing and kayaking, where the ability to overcome exceptional resistance must be maintained over long periods. It also plays a key role in gymnastics, wrestling, boxing, judo and in many team sports. 


Strictly speaking, relative strength is not actually a specific type of strength but rather a way to measure strength in relation to an athletes body mass. It is the maximum force an athlete can generate per unit of bodyweight. It is affected by factors such as changes in body mass and neural drive. High relative strength is of critical importance to performance in sports in which athletes have to move their entire bodyweight, e.g. jumps, gymnastics, and sports that involve weight classes, such as judo and boxing. 


The muscle develops tension and shortens, causing movement to occur. 


The muscle lengthens while producing tension, thus braking or controlling the speed of movement. 

When lifting the barbell overhead during the positive phase of an overhead press, the triceps shorten (concentric contraction). When lowering the barbell from overhead to under the chin during the negative phase of the overhead press, the triceps lengthen (eccentric contraction). 

When pulling the body up during the positive phase of a chin-up, the biceps shorten (concentric contraction) resulting in an elevation of the body. During the negative phase of the chin up, when lowering the body from the elevated chin-up position, the biceps lengthen (eccentric contraction). 


A muscle develops tension while its length remains unchanged, thus producing no external movement. However, when isometric tension is developed, the muscle belly and fascia do shorten internally, but a shortening in the agonist muscles is countered equally by a shortening in the antagonist muscles. Having the ability to perform adequate isometric tension is paramount in sports, for both performance optimisation and the avoidance of injury.

Strength qualities and their importance in athletic performance

BACK TO TOP

Isometric contraction

Maximal strength

Speed strength

Starting strength

Explosive strength

Reactive strength

Strength endurance

Relative strength

Concentric contraction

Eccentric contraction

Strength endurance

The aim of supplementary training for cyclists

We provide cyclists with supplementary training for their sport. The aim of supplementary training for cyclists is to improve efficiency and reduce energy leakage and excessive wear on the body’s structures. This is accomplished by achieving structural balance, optimal muscle synergy and the desired strength qualities for cycling. 

In addition, supplementary training for cyclists has aim to improve how each individual moves and feels once off the saddle. Due to the nature of cycling and more specifically the posture adopted and the way in which the muscles are utilised when cycling, what happens to the neuromuscular system when cycling has to be offset in order for your body to function efficiently and pain free once you are off the saddle. We achieve this by elongating and “switching off” short, tight muscles and in turn “switching on” weak, deactivated muscles. Thereafter, we integrate the action of the now activated muscles in to your movement patterns with sling system training. When this is successfully achieved you will move better and feel better.

Through working with us at Movement Efficiency you will:

  • Improve your posture, comfort and performance on the bike
  • Become more efficient on your bike
  • Protect yourself against injury
  • Retain muscle volume as you age so that you can ride fast and strong over the years
  • Move and feel better when off the saddle
  • Ride stronger and faster

We start with assessment in order to gain insight. We assess posture, movement patterns, structural balance and strength. We discuss and record the clients training history and medical history. 
We then take all the information gathered of both the participants individuality and current level of performance and see how this compares to the necessary requirements for safe and efficient cycling. We then conduct a needs analysis which is followed by a detailed initial exercise prescription. 

What to expect during your initial appointments

"When working with us cyclists remain astonished at not only how much better they feel on the saddle but also at the magnitude of the increase of their performances."

Andreas Styllas
Improving the way that you move
MOVEMENT EFFICIENCY

Rehabilitation from chronic injury and pain

MOVEMENT EFFICIENCY

Scientifically optimising physical function

MOVEMENT EFFICIENCY

Scientifically optimising your health

MOVEMENT EFFICIENCY

Strength and performance optimisation

MOVEMENT EFFICIENCY

Improving the way that you feel

MOVEMENT EFFICIENCY

Prices

PER MONTH

£880-£1760

PER SESSION

£110

(8-16 sessions per month)

SESSION DURATION IS 50-55 MINUTES

A 15-20’ discussion or more if needed in person or over the phone is offered. From then on the first session would be purchased as a single session so that you can have a better idea of the product and get to know the coach before committing to a monthly subscription. The single session will be offset from the first month's price. 



20% discount off of all prices displayed, for Ringwood (Hampshire/Dorset) clients due to new business start up. This will be honoured for at least through spring and summer 2023.

Good to Know
Discount
Message
Phone
Email
Name

Any questions, please ask, or if you would like to book a consultation please let us know below and we will get right back to you.

Thank you!

CONGRATULATIONS ON TAKING THE FIRST STEP!

We WILL CONTACT YOU SHORTLY AND LOOK FORWARD TO SPEAKING TO YOU SOON.

Contact us